A UV-curable optical clear adhesive is a transparent adhesive that cures within seconds under ultraviolet light. Because it fixes lenses, cover glass, display layers and optical sensors with almost no heat, it is widely used in optical and display assembly.
Bonding thin optical parts calls for an adhesive that is transparent, does not heat the parts, and does not load them with stress once cured. UV-curable acrylates are well suited to meeting all three at once.
Strengths and limits of UV cure
- Fast cure: it sets within seconds, so parts move straight to the next step. A UV lamp is all the equipment needed.
- Almost no heat load: no oven is used, which suits heat-sensitive parts such as plastic lenses, thin films and display panels.
- Ample working time: it does not cure until exposed to light, leaving time to position parts.
- Limit: it only cures where light reaches. One of the parts must transmit UV, and where there are shadowed areas a UV and heat dual-cure adhesive should be considered.
Three things to check
Viscosity
Low viscosity spreads wide and thin, which suits clear bond layers. High viscosity stays where it is placed, which suits bead or dot dispensing.
TI (thixotropic index)
A TI close to 1 levels itself out; a higher TI holds the dispensed shape. Choose based on whether you need an even thin layer or adhesive only in defined spots.
Cured hardness
Higher hardness fixes parts firmly. A softer, flexible bond line absorbs stress from thermal expansion mismatch and reduces cracking or delamination of thin glass and film. Products that flex or take impacts, such as wearables, benefit from a flexible grade.
COFA 2000U series
The COFA 2000U series (catalog designation 2001UA to 2003UA) is a transparent UV-curable adhesive based on urethane-modified acrylate. Its flexible crosslinked structure keeps stress from concentrating and reduces cracking, and it is free of halogens and bisphenol A. All three grades cure at UV 3,000 mJ and are stored at 25°C.
| Grade | Viscosity | TI | Hardness | Character |
|---|---|---|---|---|
| COFA 2001U | 7,000 cps | 1.8 | Shore D 50 | Low viscosity, thin bond lines |
| COFA 2002U | 18,000 cps | 3.8 | Shore D 70 | Holds shape, rigid fixing |
| COFA 2003U | 11,000 cps | 1.0 | Shore A 55 | Flexible, stress relief |
- 2001U: the thinnest at 7,000 cps, suited to thin, wide clear bond layers.
- 2002U: 18,000 cps with a TI of 3.8 holds its dispensed shape, and Shore D 70 fixes parts firmly.
- 2003U: a TI of 1.0 lets it level itself, and its Shore A 55 flexible bond line reduces stress.
Applications
- OLED adhesive layer bonding
- Transparent bonding of thin components (liquid alternative to OCA)
- Optical sensor assembly
- Wearable and display module sealing
Frequently asked questions
What processes use UV-curable adhesives?
They cure within seconds under ultraviolet light and are used in optical, display and sensor assembly where parts must be fixed with almost no heat. Light has to reach the bond line, so at least one of the parts being joined must transmit UV.
What if some areas cannot be reached by UV?
UV alone will not cure shadowed areas. For those structures, a dual-cure adhesive is used: UV fixes the part first and heat finishes the cure. COFA's 1000 series (1001D) is designed for this.
Why does hardness matter in an optical clear adhesive?
A harder adhesive fixes parts firmly but passes on stress from thermal expansion mismatch. A softer, flexible bond line absorbs that stress and reduces cracking and delamination of thin glass or film.
What kind of material is the COFA 2000U series?
A transparent UV-curable adhesive based on urethane-modified acrylate. It is halogen-free and bisphenol-A-free, and its flexible crosslinked structure is designed to reduce stress concentration and cracking. It cures at UV 3,000 mJ and is stored at 25°C.
How do I choose between 2001U, 2002U and 2003U?
Start with low-viscosity 2001U (7,000 cps) when the adhesive must spread thin, 2002U (18,000 cps, Shore D 70) when it must hold its dispensed shape and fix firmly, and 2003U (Shore A 55) when a flexible bond line is needed to reduce stress.
Share your process conditions
Tell us your package type, bump pitch and gap, dispensing method and cure profile, and we will review the right grade and an evaluation plan with you.
Published 2026-11-03 · COFA Co., Ltd. technical team